ADAM-Audio Sub10 Mk2 Active Subwoofer 200 W / 1x10"

01378
3,999 
Out of stock
Payment options

Please keep the system safe, when the system is working at its limit/peak, it may break down (collapse). To avoid damage, pay attention to the indicator light, which is located on the speaker body. When working at the limit, it starts flashing yellow and/or red, at which time the sound of the speaker changes and emits Distorted sound When these symptoms appear, it is mandatory to make a timely attenuation of the incoming signal by means of the signal regulator located on the speaker housing.

Please note that compliance with this condition is mandatory in order to prevent the loudspeaker from malfunctioning.


The Sub10 MK2 from Adam Audio is an ideal choice to fill out the low end of any stereo or 5.1 surround monitoring system. It has a 10-inch cone and is powered by a 200W RMS (300W peak) amplifier. It offers both XLR and RCA I/O connectors for integration with just about any system. The bandwidth of the Sub10 MK2 and the connected speakers may be adjusted separately, allowing it to be used with many different satellites.


Crossovers are made as musical as possible thanks to variable fourth-order Linkwitz-Riley filters. The incoming signal can be phased from zero to 180 degrees for a great degree of flexibility in placement of the subwoofer. Rear-panel gain and filter adjustment controls are provided. A down-firing bass reflex tube avoids breathing noise. Multiple units may be chained together if desired. The Adam Audio Sub10 MK2 ships with a power cord and four protective rubber foot plugs.

  • Excellent low-end companion to any sound system
  • Full XLR and RCA I/Os
  • Cool-running 200W RMS (300W peak) amp uses pulse width modulation (PWM) to provide greater than 80% overall efficiency
  • Down-firing bass reflex tube reduces breathing noise
  • Multiple units may be chained
  • Bandwidth of the subwoofer and connected speakers may be adjusted separately
  • Variable fourth-order Linkwitz-Riley filters for musical crossovers
  • Incoming signal can be phased between 0 and 180 degrees, allowing a high degree of placement flexibility
  • Gain and filter controls on rear panel
Inputs
2 x XLR, 2 x RCA
Brand
ADAM-Audio
Sound Pressure Level SPL
113dB
Power
200 Watt
Frequency Range
25Hz - 150Hz
Woofer Size
10" inch
Find similar
  • Sale